Forrest CM12806115 Chopmaster 12-Inch 80-tooth ATB Miter Saw Blade with 1-Inch Arbor

Forrest CM12806115 Chopmaster 12-Inch 80-tooth ATB Miter Saw Blade with 1-Inch Arbor Review

Forrest CM12806115 Chopmaster 12-Inch 80-tooth ATB Miter Saw Blade with 1-Inch Arbor Feature

• Saves 1/3 wood loss on each cut.
• Feeds easily when used for moderate rips and crosscuts on a table saw.
• Reduces "JUMP IN" for better "PULL-CONTROL."
• Eliminates bottom splintering on RADIAL CROSSCUTS.
• With new 30° ATB tooth style this blade stops totally, ALL bottom and top splintering on ply veneers on both radial and table saw machines

We're rarely speechless around here, but after bringing this blade down through a gorgeous piece of maple, it nearly happened. We knew that Forrest makes some of the best blades on the planet, but we truly weren't prepared for the gorgeous cut we got with this blade.

On the back side of plywood, we had zero tearout. When we cut a length of 8/4 oak, it felt like a hot knife through butter, and the result was too good to be believed: smooth as glass, completely free of circle marks of any kind, and it looked like it had been sanded already - cut after cut after cut.

You can pick up a miter saw blade for a tenth of this price, of course. It will cut. But it won't cut like this. And it won't last as long as this blade will, not by a long shot. Because it's made of double-hard C-4 carbide, it holds it edge for what seems like forever, and it resharpens beautifully.

Forrest spends a good deal of time on each blade, ensuring that it's as straight as can be, and that's part of what you're paying for. If you spent good money on a decent miter saw, you owe it to yourself to put this blade on it. After parting with your money, you will never regret buying this blade. --Kris Jensen-Van Heste Maintain maximum stability for the best cut with a Forrest Chopmaster Saw Blade. Specially designed for sliding compound miter and radial-arm saws, grabbing and throwing of scrap cutoffs has been minimized with this design. This blade has a heavier than normal steel plate and a negative face hook. Its made with double-hard C-4 submicron carbide for up to 300 longer life. Each blade is hand-straightened to a runout of .001/.002 for maximum cut quality. The tooth style (4 points and flat) produces steady, clean cuts with no bottom splintering. Youll be delighted by the extra smooth, tight cuts youll get with this blade. The 12" blade has a 1/8" kerf and 1" arbor hole.

DeWalt DW718SP 12-in Double-Bevel Sliding Compound Miter Saw

DeWalt DW718SP 12-in Double-Bevel Sliding Compound Miter Saw Review

The DW718SP takes cut capacity to the next level. The innovative back fence design delivers cut capacity up to 2 x 16 at 90 degrees and will cut up to 6-1/2â? base molding when standing vertically against the fence. The DW718SP is powered by a 15 Amp motor and comes equipped with a 12â? carbide blade which spins at 3,600 rpm. The extra tall fences and double bevel feature deliver unmatched performance. The DW718SP incorporates an adjustable stainless steel miter detent plate with 10 positive stops for the most common miter cuts. The cam lock miter handle eliminates the need to twist the miter handle to lock in on the miter angle and delivers a quick and solid miter lock. The saw features a miter detent override which allows the user to override the miter stops and adjust to the miter setting desired without the saw slipping into the miter detents.

DEWALT DW745 10-Inch Compact Job-Site Table Saw with 16-Inch Max Rip Capacity

DEWALT DW745 10-Inch Compact Job-Site Table Saw with 16-Inch Max Rip Capacity Review

DEWALT DW745 10-Inch Compact Job-Site Table Saw with 16-Inch Max Rip Capacity Feature

• 15 Amp motor quickly rips through hardwoods with ease
• Rack and pinion fence rails make fence adjustments fast, smooth and accurate
• Telescoping fence rails retract to create a small, portable package
• 16-inch of rip easily cuts a variety of larger shelving and trim materials
• Metal roll cage base offers greater durability than plastic bases; Blade can be adjusted 0 - 45 degrees for bevel applications

The DEWALT versatile 10-Inch Jobsite Table Saw features the Site-Pro Modular Guarding System for application-specific setups that result in quick, accurate cuts. It pairs a portable design with a powerful 15 amp motor and large16-inch rip capacity. This saw comes with blade guards, a miter gauge, a push stick, and a dependable 10-inch, 24-tooth carbide blade to get your project started right away.

10-Inch Compact Jobsite Table Saw with Site-Pro Modular Guarding System At a Glance: Powerful 15 amp, high-torque motor delivers no-load speed of 3,850 rpm Quick, tool-free adjustments with Site-Pro Modular Guarding System Telescoping fence rails Dust-collection port for fast clean up Three-year limited warranty, one-year free service, and 90-day money-back guarantee

This saw features a dependable 15 amp motor that delivers a no-load speed of 3,850 rpm. View larger.

Weighing just 45 pounds, the table saw comes with a folding stand for easy setup and tear down. View larger.

Consistent, Powerful Performance
Thanks to a 15 amp, high-torque motor, this DEWALT table saw delivers the power you need for tough jobs like cutting hardwood and pressure-treated lumber. The saw's 10-inch blade spins at a no-load speed of 3,850 rpm for quick, clean cuts--no matter what the application.

Convenient Site-Pro Modular Guarding System
The DEWALT versatile Site-Pro Modular Guarding System makes it easy to set up for a variety of applications by allowing tool-free adjustment of application-specific guarding components.

The saw's exclusive fence configuration enables a huge 16-inch rip capacity. Rack and pinion fence rails make fence adjustments fast, smooth, and accurate. The fence's telescoping design allows the rails to move out to 16 inches to rip full sheets of materials or be retracted for a compact design that's easy to transport.

In addition to offering large rip capacity, this saw features a maximum cut depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees. Its table surface is coated to reduce friction for improved cut quality across the board, while a metal roll cage base provides a sturdy setup and improved durability when compared with plastic bases.

Portable Design for Use Anywhere
This DEWALT table saw weighs just 45 pounds which, along with the folding table saw stand makes for easy setup and tear down. You can move it from your workshop to the worksite with ease.

For added convenience, on-board storage provides easy access to the Site-Pro Guarding components and the push stick when they're not in use. A handy 2-1/2-inch dust collection port allows you to connect the saw to a Shop-Vac for efficient dust extraction and a cleaner work area.

This 10-inch jobsite table saw with Site-Pro Modular Guarding System also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box
DW745 DEWALT 10-Inch Job Site Table Saw, 10-inch 24-tooth carbide blades, miter gauge, push stick, blade guard.

Quick, tool-free adjustments

Housing fits snugly around stand base

Lock mechanism fits on top of table stand

Modular guard system protects hands and fingers

Factory Reconditioned RYOBI ZRTS1141L 9 Amp 7-1/4-Inch Miter Saw with Laser

Factory Reconditioned RYOBI ZRTS1141L 9 Amp 7-1/4-Inch Miter Saw with Laser Review

Factory Reconditioned RYOBI ZRTS1141L 9 Amp 7-1/4-Inch Miter Saw with Laser Feature

• TS1141 Compound Miter Saw
• 24T Carbide-Tipped Blade
• Blade Wrench/Dust Bag
• Work Clamp
• Operator's Manual/One Year Factory Warranty

The Definition of Reconditioned is as follows: Units that have been returned to the Manufacturer and repaired to Factory Specifications, these units may have cosmetic blemishes and look to be used, but are fully functional and considered as new units, however, cost much less. FEATURES --RYOBI Power Tools introduces the 7-1/4" Miter Saw with Laser. This compact, lightweight saw is powered by a heavy duty 9 AMP motor. With its Exactline Laser Technology and 9 marked stops at the most common cutting angles, this saw makes small cuts a breeze. Perfect for the homeowner or cost conscious pro, the RYOBI 7-1/4" Miter Saw with Laser is definitely one for the garage. The Ryobi 9 Amp 7-1/4 in. Miter Saw is ideal for making a variety of small cuts in wood. The heavy-duty 9 Amp motor delivers up to 5,800 RPM for the power to make difficult cuts, and the Exactline laser alignment system is adjustable to help you follow cut marks and keep the saw and the cut aligned. The miter angle stops at 0, 15, 22.5, 31.6 and 45 degrees left enable you to make accurate miter cuts. Heavy Duty 9 amp motor for a variety of small cuts Exactline adjustable laser accurately aligns your cut line with the blade Up to 2x4 Cutting Capacities, and 3 1/2 inch cross cut capacity. Horizontal "D" handle for improved comfort Spindle lock for easy single wrench blade changes Compact and lightweight design Motor: 120 V AC, 9 Amps Motor Speed: 5,800 r/min. (RPM) Dust Port: 1-1/4 in. Blade Arbor: 5/8 in. Blade Diameter: 7-1/4 in. Cutting Capacities: Baseboard Laying Flat 3-1/2" 90° Miter Cut 1-1/5" x 4-1/4" 45° Miter Cut 1-1/2" x 3" 45° Bevel Cut 3/4" x 3-1/2"

Buffalo Tools CMS814UL 8-1/4-Inch Compound Miter Saw

Buffalo Tools CMS814UL 8-1/4-Inch Compound Miter Saw Review

CMS814UL Features: -8.25'' Compound miter saw.-Material: Metal / Plastic. Includes: -Includes 1-24 tooth carbide tip sam blade. Specifications: -120V / 60 Hz, 10.5 A / 1200 W motor power. Assembly Instructions: -No assembly required. Dimensions: -Cross cut up to 2'' H or 4.75'' W at 90 degrees.-Miter up to 2'' H or 3.38'' W at 45 degrees.-Bevels up to 1.38'' H or 4.75'' W.-Dimensions: 11'' H x 15'' W x 15'' D.

DEWALT DW7029 Wide Miter Saw Stand Material Support and Stop

DEWALT DW7029 Wide Miter Saw Stand Material Support and Stop Review

DEWALT DW7029 Wide Miter Saw Stand Material Support and Stop Feature

• 15-Inch wide material support; supports wider work piece when cutting
• Flip-up stop for fast conversion to a cut stop
• Adjustable height from 3-7/8-Inch to 6-Inch to match any miter saw table height
• Compatible with dw723, dwx723 and dwx724 miter saw stands

DeWALT DW7029 Wide Miter Saw Stand Material Support and Stop DeWALT DW7029 Wide Miter Saw Stand Material Support and Stop Features: Includes: 1- Wide Material Support and Stop 15" wide material support supports wider work piece when cutting Flip-up stop for fast conversion to a cut stop Adjustable height from 3 7/8" to 6" to match any miter saw table height Compatible with DW723, DWX723 and DWX724 Miter Saw Stands Three Year Limited DeWalt Warranty One Year Free Service Contract with Manufacturer

DEWALT DW717 10-Inch Double-Bevel Sliding Compound Miter-Saw

DEWALT DW717 10-Inch Double-Bevel Sliding Compound Miter-Saw Review

DEWALT DW717 10-Inch Double-Bevel Sliding Compound Miter-Saw Feature

• Exclusive bevel detent system, 7 positive stops delivers fast accurate repeatable cuts
• Adjustable stainless steel miter detent plate with 11 positive stops
• Optimizes cutting accuracy, exclusive cross cut stop positions cutting head for maximum vertical cut capacity
• Machined base fence support maintains fence perpendicularity with blade for cutting accuracy
• Dual horizontal steel rails with innovative clamping mechanism and linear ball bearings

Whether you're cutting baseboards or crown molding, the DEWALT 10-Inch Double-Bevel Sliding Compound Miter Saw provides quick, accurate cuts to complete the job. Thanks to a powerful motor, an easy-to-adjust cam-lock miter handle, convenient miter and bevel stops, plus a tall fence for accomodate oversized moldings, this saw is ready for a range of crosscutting and miter cutting applications.

10-Inch Double-Bevel Sliding Compound Miter Saw At a Glance: Powerful 15 amp motor delivers no-load speed of 4,000 rpm Adjustable stainless steel miter detent plate with 11 positive stops Tall, sliding fence for work with crown and base moldings Four hardened steel bevel stops on each side for versatility Two steel horizontal rails for accurate blade travel Three-year limited warranty and 90-day money-back guarantee

This saw features a 15 amp motor and a no-load speed of 4,000 rpm. View larger.

This double-bevel sliding compound miter saw quickly cuts baseboards and trim. View larger.

Smart, Powerful Design for Quick, Accurate Cuts
The DEWALT double-bevel sliding compound miter saw's 10-inch blade is backed by a powerful and dependable 15 amp motor. Offering a no-load speed of 4,000 rpm, it makes quick work of cutting framing or molding, as well as other crosscutting and miter-cutting jobs.

This sturdy saw is designed to deliver precise cuts, allowing for the versatile setups required for miter applications. The precise miter system's adjustable stainless steel miter detent plate features 11 positive stops for easy setup and improved efficiency. An easy-to-adjust cam-lock miter handle delivers quick and accurate miter angles, and features a convenient detent override, which allows you to adjust the miter setting without the saw slipping into the miter detents. And the saw's big miter capacity--0 to 60 degrees to the left and 0 to 52 degrees to the right--adds versatility.

Tall Fencing and Compact Sliding Rails
The tall fence supports 6-1/4-inch crown molding nested vertically, as well as 6-inch base molding set against the fence. The fence slides out of the way easily when it's time to make bevel cuts. This saw stays compact thanks to its sliding saw dual horizontal steel rails, which feature an innovative clamping mechanism and linear ball bearings for increased accuracy and durability.

Increased Bevel Capacity and Convenient Stops
This saw is designed to deliver quick, accurate bevel cuts. You can easily set up for bevel cuts that measure between 0 and 48 degrees to the left and to the right. This handy setup provides increased capacity for big jobs and allows you to flip the saw instead of the material. Plus, with several bevel stops, it makes finding and setting the bevel angles a quick, easy process.

Ideal for a range of applications, the saw's unique back fence design allows it to deliver clean, 45-degree bevel cuts through dimensional lumber that measures up to 2 by 14 inches.

Portable and Compatible with the DEWALT Laser and L.E.D. System
This lightweight sliding compound miter saw weighs just 51 pounds and features a built-in carry handle, so you can move it around the jobsite easily and lift it comfortably when it comes time to stow the saw at the end of the day.

For additional accuracy and ease of use, this saw is compatible with the DEWALT DW7187 (sold separately) adjustable miter saw laser system (sold separately), which ensures that the cutting line is easy to see via a red laser line. An addition option is the DWS7085 (sold separately) which light the work surface and identifies the specific cut line.

This 10-inch double-bevel sliding compound miter saw also comes with a DEWALT warranty package that includes a three-year limited warranty and a 90-day money-back guarantee.

What's in the Box
DW717 DEWALT 10-Inch Double-Bevel Sliding Compound Miter Saw.

The precise miter system's adjustable stainless steel miter detent plate features 11 positive stops and can rotate 90-degrees for a wide range of cuts.

Rockwell RK7138 Shop Series 15 Amp 10-Inch Sliding Miter Saw

Rockwell RK7138 Shop Series 15 Amp 10-Inch Sliding Miter Saw Review

Rockwell RK7138 Shop Series 15 Amp 10-Inch Sliding Miter Saw Feature

• Lightweight and easy to transport
• Cast aluminum base
• Laser guide for accurate cuts
• Bevel capacity 0 - 45 degrees
• Powerful 15 amp motor

Aluminum base with laser and transparent movable guard. Bevel capacity=0-45 degrees; Mitre capacity=0-45 degrees (Left and Right); Max cutting miter/bevel=0/90: 12"x3-1/2"; Max cutting miter/bevel=0/45: 12"x1-5/8"; Max cutting miter/bevel=45/90: 8-1/2"x3-1/2"; Max cutting miter/bevel=45/45: 8-1/2"x1-5/8". Accessories include: Blade Spanner; Dust Bag; Work Clamp; Extension Rail.