Factory-Reconditioned Skil 3315-01-RT 15 Amp 10-Inch Compound Miter Saw

Factory-Reconditioned Skil 3315-01-RT 15 Amp 10-Inch Compound Miter Saw Review

Factory-Reconditioned Skil 3315-01-RT 15 Amp 10-Inch Compound Miter Saw Feature

• Reconditioned Skil Products have a One-year warranty through the Skil factory or an authorized service center
• Table extension with extension rail
• Horizontal clamping system
• Left and right lock-off switches
• Die-cast aluminum fence with ruler markings.

This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new conditions. Some tools may contain cosmetic blemishes. Safe Cut System is designed for safe operations. The horizontal clamping system holds wood securely against fence during cut. Table extension with extension rail to support long, large work pieces. It also has 9 positive stops for setting common miter angles.

Hitachi 308394 Vise Assembly (A) for the Hitachi C10FS Compound Miter Saw

Hitachi 308394 Vise Assembly (A) for the Hitachi C10FS Compound Miter Saw Review

Hitachi 308394 Vise Assembly (A) for the Hitachi C10FS Compound Miter Saw Feature

• Well-built with a simple design
• Compatible with the Hitachi C10FS Compound Miter Saw
• Designed for vise assembly
• Quick setup is intuitive and easy to use
• Comes with a 30-day limited warranty

The Hitachi 308394 Vise Assembly is well-built with a simple design and fits the Hitachi C10FS Compound Miter Saw. This product will not break or chip and is used for vise assembly on Hitachi compound miter saws. This product is specifically designed for sawing projects and is made of high quality materials. What distinguishes this part is its intuitive, quick setup and versatile design. Use this vise assembly with your Hitachi power tool in seconds flat. The Hitachi 308394 Vise Assembly is warranted to the original purchaser to be free from defect in materials and workmanship for a period of 30-days from the original purchase date. Every Hitachi accessory is designed to the highest standards and is rigorously tested for both performance and durability. Since its inception, Hitachi has pioneered innovative technologies that have improved the quality of craftsmanship worldwide. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

DEWALT DW3106P5 2 Blade 10-Inch 60-Tooth Crosscutting Saw Blade and 10-Inch 32-Tooth General Purpose Saw Blade Combo Pack

DEWALT DW3106P5 2 Blade 10-Inch 60-Tooth Crosscutting Saw Blade and 10-Inch 32-Tooth General Purpose Saw Blade Combo Pack Review

DEWALT DW3106P5 2 Blade 10-Inch 60-Tooth Crosscutting Saw Blade and 10-Inch 32-Tooth General Purpose Saw Blade Combo Pack Feature

• Tougher tungsten carbide stays sharper longer
• Thin kerf for fast and smooth cutting action
• Computer-balanced plate reduces vibration for improved accuracy and better finish
• Durable tungsten carbide maintains true edge
• Best used for miter saw and slide miter saw jobs

The DEWALT DW3106P5 saw blade combination pack contains a 10-inch DW3106 60-tooth fine-finish blade and a DW3103 32-tooth general purpose saw blade. Perfect for miter saw and slide miter saw jobs with softwood, hardwood, chipboard, and plywood, these slim-kerf blades offer quick and even incisions with minimum excess debris. A patent wedge shoulder places additional steel in back of every tip, maximizing strength and precision. Get the cutting action you need at the right price with this heavy-duty combination pack.

DEWALT DWX725B Heavy Duty Work Stand with Miter Saw Mounting Brackets

DEWALT DWX725B Heavy Duty Work Stand with Miter Saw Mounting Brackets Review

DEWALT DWX725B Heavy Duty Work Stand with Miter Saw Mounting Brackets Feature

• Compact design allows easy transport and storage
• 1000 lbs. capacity (each) handles the toughest jobs
• Lightweight aluminum construction (15.4 lbs.) allows for easy transport to and from the jobsite
• Legs provide superior support and fold for easy storage
• Transport Latch allows pair of stands to be easily transported together

1000 lb. capacity handles the toughest jobs. Compact design and lightweight aluminum construction allows for easy transport and storage. Legs provide superior support and fold for easy storage. Leg lock levers allow for fast and easy set up. Transport latch allows pair of stands to be easily transported together. Includes model

Makita LS1040F 15 Amp 10-Inch Compound Miter Saw with Fluorescent Light

Makita LS1040F 15 Amp 10-Inch Compound Miter Saw with Fluorescent Light Review

Makita LS1040F 15 Amp 10-Inch Compound Miter Saw with Fluorescent Light Feature

• Powerful 15 amp motor handles a wide variety of job easily
• Dual post compound pivoting arm
• Lightweight and portable (only 24.2 pounds)
• Shaft-lock for easy blade changes
• Fluorescent light for improved visibility and safer operation

Includes 10-in Compound Miter Saw w/ Light - LS1040F-R, Socket Wrench - 782212-4, 40-Tooth Carbide-Tipped Blade - 721434-1, Dust Bag - 122523-9, Triangular Rule - 762001-3, Operating Manual

Makita LXSL01Z 18V LXT Lithium-Ion Cordless 7-1/2 Inch Dual Slide Compound Miter Saw (Tool Only)

Makita LXSL01Z 18V LXT Lithium-Ion Cordless 7-1/2 Inch Dual Slide Compound Miter Saw (Tool Only) Review

Makita LXSL01Z 18V LXT Lithium-Ion Cordless 7-1/2 Inch Dual Slide Compound Miter Saw (Tool Only) Feature

• Powerful Makita-built motor delivers 2,200 RPM
• Compact design at only 27.5 lbs. for increased jobsite portability
• Large dimensional lumber capacity: 2? x 12? at 90° and 2? x 8? at 45°
• Four steel rail sliding system increases rigidity to produce superior accurate cuts
• Direct drive gearbox for increased cutting efficiency and less maintenance

Includes 18V Cordless LXT Lithium-Ion 7-1/2-in Dual Slide Compound Miter Saw - LXSL01, (2) 18V LXT Lithium-Ion Batteries - BL1830, 30-Minute Rapid Optimum Charger - DC18RA, 7-1/2-in 40T Saw Blade - A-90912, Dust Bag - 122852-0, #10 Socket Wrench - 782223-9, Triangular Ruler - 762001-3, Vertical Vice - 122571-8, (2) Extension Wings - 322312-4

DEWALT DWX724 Compact Miter Saw Stand

DEWALT DWX724 Compact Miter Saw Stand Review

DEWALT DWX724 Compact Miter Saw Stand Feature

• Universal design works with all brands of miter saws
• Compact design allows easy transport and storage
• Lightweight aluminum construction (29.8 lbs.) allows for easy transport to and from the jobsite
• 40-Inch beam extends to support up to 10 feet of material and up to 500 lbs.
• Legs provide superior support and fold for easy storage

Includes Compact Miter Saw Stand - DWX724, (2) Convertible Work Supports and Stops, (2) Mounting Brackets

Makita LS1221 12-inch Compound Miter saw Kit

Makita LS1221 12-inch Compound Miter saw Kit Review

Makita LS1221 12-inch Compound Miter saw Kit Feature

• 12-inch compound miter saw kit; easily handles a 4 x 6 at 90-degrees
• 15 amp motor delivers 4,000 rpm; horizontal D-handle; positive stops at 9 settings
• Carbide-tipped blade; fiber-reinforced polycarbonate and aluminum coating
• Includes vise, blade, 2 extension wings, socket wrench, dust bag
• 24 by 26-1/2 by 23-7/8-inches; 36.4-pounds; 1-year warranty

This Makita 12in. compound miter saw can cut crown molding up to 5 1/2in. tall. Its powerful 15 Amp motor delivers 4000 RPM for fast, precise cutting. Features positive stops at 9 settings for convenience and accuracy. Horizontal D-handle design for easy and comfortable operation. Fence pivots to support larger stock. U.S.A. Amps: 15, Cutting Capacity - 0 Degree Miter: 3 7/8in. H x 6in. D, Blade Diameter (in.): 12, Speed - No Load (RPM): 4,000, Total Positive Miter Stops: 9, Max. Degree Miter Cuts - Left: 45, Max. Degree Miter Cuts - Right: 45, Fence: Pivoting, Laser Guide: No, Blade Included: Yes, Wrench Included: Yes, Dust Bag Included: Yes

Factory-Reconditioned Ridgid ZRR4120 15 Amp 12-in Compound Miter Saw With Exactline Adjustable Laser

Factory-Reconditioned Ridgid ZRR4120 15 Amp 12-in Compound Miter Saw With Exactline Adjustable Laser Review

Factory-Reconditioned Ridgid ZRR4120 15 Amp 12-in Compound Miter Saw With Exactline Adjustable Laser Feature

• 15 Amp heavy-duty motor powers through the most difficult cuts
• Exactline adjustable laser alignment system assists the operator to accurately align blade with the cut line
• 2-1/2-in dust port provides connection to standard dust collection systems to help keep work area clean
• Work clamp with quick-release lever securely holds material in place
• Quick-release miter and bevel locks provide users with easy access to make quick angle adjustments

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 15 Amp, 12-in Compound Miter Saw With Exactline Adjustable Laser - ZRR4120

DEWALT DWX723 Heavy Duty Miter Saw Stand

DEWALT DWX723 Heavy Duty Miter Saw Stand Review

DEWALT DWX723 Heavy Duty Miter Saw Stand Feature

• Universal design works with all brands of miter saws
• Lightweight aluminum construction (35 lbs.) allows for easy transport to and from the jobsite
• 5-1/2-Inch beam extends to support up to 16-Feet of material and up to 500 lbs.
• Miter saw mounting brackets allow easy and secure mounting of miter saw to stand
• Non-marring feet on tool mount will not scratch material

DEWALT's DWX723 miter saw stand is a heavy duty piece of equipment that expands the usage possibilities of a miter saw. As it works with most miter saw brands, this stand is ideal for a wide range of contractors, construction workers, carpenters, or home miter saw users.

DWX723 Miter Saw Stand At a Glance: 35 pounds in weight, supports up to 500 pounds of material Universal design of stand is compatible with all miter saws Leg lock levers provides for a rapid and simple stand set up Work stops/supports are repositionable anywhere on the rail Non-marring feet on tool mount reduce material scratching

Strong but Moveable
DEWALT's DWX723 miter saw stand can hold a serious amount of materials with a max capacity of up to 500 pounds. With its 5-1/2 foot main beam backed by extensions that stretch to support up to 16 feet's worth of materials, it's ready to become an essential part of the jobsite. Also, it has an extended length of up to 50 inches with extension lock levers that provide simple but steady locking for the supporting extensions, as well as providing an extra level of impact resistance. Even with all of this, the miter saw stand sets on the scale at only 35 pounds, which means that it's much more portable than a user might expect.

A Host of Helpful Features
Even though DEWALT's DWX723 miter saw stand is durable and ready to step up and hold a huge amount, it's a snap to store thanks to the folding legs. The miter saw’s mounting brackets will work with any brand of miter saw. The brackets have a quick release feature that makes it possible to place a saw at any point on the rail, easily releasing the saw for increased portability. These brackets also allow for having two saws on the stand at the same time. The miter saw's material supports can be adjusted to wherever needed along the rail as well as up and down, which expands the possibilities of materials cut and saws used, and they boast flip up material cut stops. In addition, the feet on the tool mount are non-marring, keeping material from getting damaged.

Dimensions & Warranty
DEWALT's DWX723 miter saw stand is 150 inches wide and 32 inches high when fully extended and 73 inches wide and 6 inches high when folded, and it weighs 35 pounds. It comes with a 3-year limited warranty, a 1-year free service contract, and a 90 day money back guarantee.

About DEWALT
Raymond E. DeWalt followed in his father's footsteps by holding mill and constructions jobs from the time he left school. No matter what the job, the question of high labor costs always concerned him. To help cut these costs, occasionally he rigged up a machine to meet some special need. Eventually, Mr. DeWalt was offered a position as head of a woodworking mill that manufactured almost everything from boxes to full-fledged houses. He designed a yoke and attached it directly to a motor and saw, then mounted it on a standard arm. The saw could be raised, lowered, slid back and forth, moved to any angle, or tilted to any bevel. It instantly lowered costs and increased productivity, and was the first DEWALT tool. Today the DEWALT power tools line consists of over 200 electric power tools and over 800 accessories including: drills and hammer drills, screwdrivers, circular, chop, miter, table, reciprocating, and jig saws, planers, impact wrenches, die, angle, and bench grinders, shears, nibblers, sanders, laminate trimmers, routers, and plate joiners.

What's in the Box
One DWX723 miter saw stand, 2 convertible work supports/stops, 2 mounting brackets. Includes Heavy Duty Miter Saw Stand - DWX723, (2) Convertible Work Supports and Stops, (2) Mounting Brackets

Milwaukee 6950-20 12-inch Dual Bevel Miter Saw with Digital Miter Angle Fine Adjust

Milwaukee 6950-20 12-inch Dual Bevel Miter Saw with Digital Miter Angle Fine Adjust Review

Milwaukee 6950-20 12-inch Dual Bevel Miter Saw with Digital Miter Angle Fine Adjust Feature

• Miter Angle Fine Adjust with Detent Override - makes it simple to dial-in precise miter angles
• Miter Angle Digital Readout & no. 8211; provides repeatable accuracy to 0.1-degrees
• Dual-integral Jobsite Lights & no. 8211; fully illuminate the work -piece and cut line from either side of the blade
• 15.0 amp, 3.3 Max -horsepower Direct Drive Motor - provides-increased power for high performance cutting-Inch hard lumber
• Integral Dust Channel - captures 75% of all dust and debris cut by capturing dust near the cut on both sides of the blade and directing it to the back of the saw

Includes 12-in Dual-Bevel Compound Miter Saw - 6950-80, (1) Carbide Tipped Blade, Blade Wrench

Bosch 4410 10-Inch Dual-Bevel Sliding Compound Miter Saw

Bosch 4410 10-Inch Dual-Bevel Sliding Compound Miter Saw Review

Bosch 4410 10-Inch Dual-Bevel Sliding Compound Miter Saw Feature

• Up Front bevel lock lever and range selector knob 8212; Easily-accessed controls for quick and accurate bevel settings
• Microfine miter adjustment knob 8212; for fine adjustment of key (detent) miter angles by up to 2-Degree, left or right
• Multi-positioned main handle 8212; Easily locks into any of four positions for optimum comfort and control
• Large 21-Inch aluminum base with cast sliding extensions for 37-1/4-Inch total length 8212; Provides extended grip areas and extra support for longer materials
• Crown miter detents 8212; 31.6-Degree miter and 33.9-Degree bevel detents for quick, accurate crown cuts

This might just be the perfect miter saw, packed with everything you ever wished for and then some. Of course, a saw's nothing if it's not accurate, but the Bosch 4410 is dead-on right from the box. Of all its great features, our favorite by far is the four-position handle. Like a vertical grip? You've got it. Horizontal? That too. In a stroke of engineering genius, Bosch designed the handle to convert easily to the grip that suits you best, a feature so desirable that we bet it will start appearing on other brands. Our usual complaint about miter saws is that the fence is too low, and Bosch has addressed that with nice 4-1/2 inch tall Speed Track sliding fences, making any bevel setup and crown molding cut a cinch. Yet another change we appreciated was the relocation of the bevel lever and adjustment knob right up in front where you need it. Speaking of bevels, you've got a complete range on both left and right, at 47 and 46 degrees respectively. The miter detent system is super accurate, but sometimes the rest of the world isn't perfect and a 45-degree miter might not be what you need. No problem. Override the detent and sneak up on the cut with the superb micro-fine adjustment, even on a long workpiece, thanks to the sliding base extensions and handy tool-free clamping levers. It always irritates us when we can't read the numbers on a tool, and even that complaint is taken care of with the easy-to-see scale for both the bevels and miters. Last but far from least, this saw is powered by a 3 hp max, 15-amp motor that runs the blade through oak like butter. Even the included blade is high quality and leaves a flawless cut line. A beautiful machine.--Kris Jensen-Van Heste Upfront bevel controls for accuracy, convenience and unmatched performance! The 4-position main handle provides four easy change settings for optimum comfort and control. The built-in sliding base extensions offer extra support for longer material lengths.

Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Review

Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Feature

• 10-inch 80T ultra fine finish cut-off blade with a laser-cut 5/8-inch arbor
• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
• Heat expansion slots let blade expand due to heat build-up; durable micrograin titanium carbide
• Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
• Laser cut arbor for accurate blade rotation reducing vibration and premature wear

For a blade dedicated to cutting ultra-fine finish work with remarkably clean, chip-free results, look no further than the Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade. Ideal for fine cabinetmaking, this is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.

Model # D1080X Diameter 10" Machine Use Miter/Slide Miter Saw, Table Saw Application Finishing Teeth 80 Hi-ATB Arbor 5/8" Kerf .098" Hook Angle 15°

Makes Clean, Chip-Free Cuts in Delicate Finish Work
Achieving premium results when creating finish crosscuts in ultra-fine materials is all about clean, accurate cuts. The Freud D1080X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.

Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making ultra-fine finish crosscuts in delicate pieces. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1080X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 80 Hi-ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1080X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws
The Freud D1080X is a great addition to your workshop because it's designed with the versatility to fit a variety of table and miter saws, including sliding miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box
Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade.
FREUD SAW BLADE *10" *80T *5/8" arbor *Ultra finish cut *Super thin laser cut kerf *"Red" Perma-Shield coated *Laser cut stabilizer vents *Laser cut heat expansion slots

Rockwell RK7138 15 Amp 10-Inch Sliding Miter Saw

Rockwell RK7138 15 Amp 10-Inch Sliding Miter Saw Review

Rockwell RK7138 15 Amp 10-Inch Sliding Miter Saw Feature

• Lightweight and easy to transport
• Cast aluminum base
• Laser guide for accurate cuts
• Bevel capacity 0 - 45 degrees
• Powerful 15 amp motor

Aluminum base with laser and transparent movable guard. Bevel capacity=0-45 degrees; Mitre capacity=0-45 degrees (Left and Right); Max cutting miter/bevel=0/90: 12"x3-1/2"; Max cutting miter/bevel=0/45: 12"x1-5/8"; Max cutting miter/bevel=45/90: 8-1/2"x3-1/2"; Max cutting miter/bevel=45/45: 8-1/2"x1-5/8". Accessories include: Blade Spanner; Dust Bag; Work Clamp; Extension Rail.

Hitachi C12LSH 15 Amp 12-Inch Dual Bevel Sliding Compound Miter saw with Laser Guide and Digital Bevel Display

Hitachi C12LSH 15 Amp 12-Inch Dual Bevel Sliding Compound Miter saw with Laser Guide and Digital Bevel Display Review

Hitachi C12LSH 15 Amp 12-Inch Dual Bevel Sliding Compound Miter saw with Laser Guide and Digital Bevel Display Feature

• Powered by impressive 15-amp motor
• Includes positive stops 0, 15, 22-1/2, 31.6, and 45 degrees right and left
• The micro bevel and miter adjustment knobs dial into precise angles
• Durably and comfortably crafted with a stainless steel detent plate, carbide blade, and soft grip
• Includes TCT 60-tooth saw, blade, vise assembly, dust bag, 17-millimeter box wrench, and 5-year warranty

The award-winning Hitachi C12LSH 12-Inch Sliding Dual Compound Miter Saw with Laser Marker and Digital Display provides smooth, accurate miters and crosscuts in a variety of workpieces, including wood, plywood, crown molding, decorative panels, soft fiberboard, hard board, and aluminum sashes. A top-of-the-line tool for trim carpenters, framers, and woodworkers who demand precision and reliability, the C12LSH features a compact slide system, an LCD, Hitachi's exclusive Laser Marker System, and more.

C12LSH Compound Miter Saw Tool Specifications Amps 15 No-Load Speed 3,800 RPM Blade Diameter 12" Miter Cutting Range Left 0°-46° Right 0°-57° Bevel Cutting Range (R & L) 0°-45° Tool Dimensions (WxDxH) 23-7/16" x 36-5/8" x 27-15/16" Tool Weight 66.1 lbs 90° Cross Cut 4-3/16" x 12-1/4" or 4-11/16" x 10-3/16" 45° Miter (L/R) 4-3/16" x 8-5/8" or 4-11/16" x 7-1/16" 45° Bevel (L) 2-3/4" x 12-1/4" or 2-15/16" x 10-3/16" Compound Cut 45° x 45° (L/L) 2-3/4"x8-5/8" or 2-15/16"x7-1/16"

Exclusive Laser Marker System ensures precision cuts. View larger.

Dial in precise angles with micro-miter and micro-bevel adjustment knobs.

Backlit LCD displays miter and bevel readings. View larger.

Compound Feature for Precise Miters and Bevels
Hitachi designed the C12LSH for versatile, easy use. The miter scale ranges between zero and 46 degrees to the left and zero and 57 degrees to the right, and a micro-miter knob lets you dial in precise angles. Additionally, positive miter stops allow you to easily change the angle of the cutting blade for creating miters in crown molding and other trim pieces.

The bevel scale ranges from zero to 45 degrees to the left and right, allowing your material to stay in place while you flip the saw head to make opposing cuts. After your major bevel angle is secured, a micro-bevel adjustment knob can be used to dial in a precise angle, while positive stops allow for quick and easy measurements and settings.

The 12-inch TCT saw blade (included) makes easy work of delicate trim and other woodwork, and the pivoting fence raises a height of 4-11/16 inches to allow for accurate vertical cutting of crown molding and other large workpieces.

Compact Slide System Requires Zero Clearance
With its revolutionary compact slide system, the C12LSH requires no rear clearance like other sliding saws. Hitachi's patented fixed rail system allows the saw head to glide smoothly along twin rails, which stay put and do not protrude to the rear of the saw. The result is a sliding saw that can be operated on a small work surface that has minimal rear clearance, such as up against a wall.

This innovative new feature is just one of the reasons that the Hitachi C12LSH was named one of the "Top 10 Innovative Tools for 2006" by Workbench Magazine, February 2006.

Laser Marker Technology and LCD for Perfect Cuts
Hitachi equipped the C12LSH with its exclusive Laser Marker System, which can be activated before the blade is in motion for exact alignment and predictable blade placement. The laser marker is easily adjustable to the left or right of the cut mark to suit your preferences, simply line up the laser with your mark on the workpiece, and the saw blade will make an exact cut along the laser guide. As long as your measurements are right, your cuts will be, too!

The C12LSH also includes an innovative LCD (liquid crystal display) that takes the guesswork out of miter and bevel readings and saves time by eliminating costly mistakes. This top-mounted digital scale swivels to provide clear and accurate miter and bevel readings from any angle.

Chock-Full of User-Friendly Features
The C12LSH has plenty of features to help you make the perfect cut the first time. To start, it has a powerful 15-amp motor that generates a no-load speed of up to 3,800 RPM to smoothly and easily cut through even the toughest hardwoods.

For precise, safe cutting, a fixed splinter guard increases safety and reduces tear-out for clean, finished cuts, and a comfortable vertical handle with a vibration-reducing elastomer grip prevents slippage and keeps you in control at all times.

The C12LSH also includes a dust bag that minimizes accumulation of dust and particles in your both your workspace and the saw's interior components, keeping your jobsite clean and prolonging the life of the tool. An added bonus, easily accessible carbon brushes will help your saw perform for the long term.

The Hitachi C12LSH measures 23-7/16 x 36-5/8 x 27-15/16 inches and weighs 66.1 pounds. Durably built, this tool is backed by an industry-leading five year warranty.

About Hitachi: A Tradition of Innovation
Hitachi Power Tools (Hitachi Koki USA, Ltd.) provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting, and fastening. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry, including creating the first-ever sliding compound miter saw to combine the capacity of a radial arm saw and the convenience of a miter saw. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

What's in the Box
C12LSH Sliding Dual Compound Miter Saw with Laser Marker and Digital Display, 12-inch, 60-tooth TCT saw blade, dust bag, vise assembly, and box wrench.

The C12LSH was named one of the "Top 10 Innovative Tools for 2006" by Workbench Magazine, February 2006.