Craftsman 12 in. Compound Miter Saw with Laser Trac

Craftsman 12 in. Compound Miter Saw with Laser Trac Review

Compound miter saw with a 15 amp motor and Laser Trac cutting guide for fast and easy set-up. Lightweight aluminum base. Includes 40T carbide blade, 2 extensions, stop block, clamp and dust bag. Cuts nominal sizes: 2 x 8 and 4 x 4 in.

Midwest Products Hobby & Craft Easy Miter Box Deluxe

Midwest Products Hobby & Craft Easy Miter Box Deluxe Review

Midwest Products Hobby & Craft Easy Miter Box Deluxe Feature

• Unlike other typical miter boxes, you can cut four miter angles in addition to a 90 Degree angle
• Injection molded with unique CAM Clamps the hold the material firmly in place
• Accepts materials up to two-inch wide and as thick as 1/2-inch
• Deluxe model includes a razor saw

This Deluxe Easy Miter Box from Midwest Tools is an improvement over other typical miter boxes that it allows you to cut four miter angles. It can cut 30, 45, 60 and 67.5 Degree plus the 90 Degree cut. It accepts materials as wide as two-inch and as thick as 1/2-inch. Injection molded construction, it also features three unique CAM Clamps which hold the material being cut firmly in place. The Deluxe Easy Miter Box includes a handy razor saw, the perfect size for our miter boxes.

DEWALT DW7027 Wide Roller Material Support

DEWALT DW7027 Wide Roller Material Support Review

DEWALT DW7027 Wide Roller Material Support Feature

• 15-Inch wide roller material support supports wide work pieces when adjusting and cutting
• Adjustable height from 4-1/4-Inch to 6-Inch to match any miter saw table height
• Compatible with dw723, dwx723 and dwx724 miter saw stands

Includes Wide Miter Saw Stand Material Roller Support - DW7027

Installing Trim (2003) DVD

Installing Trim (2003) DVD Review

Installing Trim (2003) DVD Feature

• Savage demonstrates how you can accurately cut the three basic joints: the butt, miter and cope
• How to extend window and door jambs
• How to scribe-fit baseboard along a wall
• How to cope crown molding so it stays tight
• Craig Savage is a general contractor in Palm Desert, California

In too many houses, the trimwork - door and window casings, baseboard and crown moldings - is an afterthought, rushed along by builders ready to move out or owners anxious to move in. But finish carpenter Craig Savage thinks that the most visible parts of your house - the details that you and everyone else see every day - should get the attention they deserve. In this tape, designed for pros and home owners alike, Savage guides you step by step as he trims out parts of a house and shares his job-site savvy and secrets. Youll learn to mate pieces of trim precisely, negotiate unsquare openings and seat moldings solidly against bumpy walls and ceilings. Savage starts with the basics. With the camera beside him and close up the whole way, he demonstrates how you can accurately cut the three basic joints: the butt, miter and cope. Youll also learn how to extend window and door jambs, fit casing around doors and windows, scribe-fit baseboard along a wall, and cope crown molding so it stays tight. 65 minutes.

BOSCH MS1232 Dust Bag & Elbow for 4410 4410L Miter Saws

BOSCH MS1232 Dust Bag & Elbow for 4410 4410L Miter Saws Review

BOSCH MS1232 Dust Bag & Elbow for 4410 4410L Miter Saws Feature

• Made for use on miter saw 4410
• Includes bag, frame, and elbow.

Must be used when transferring hinge location from metal jambs to wood doors. - Features: Used w/ 83038 Deluxe Hinge Templet. * Order three of a size for 3-hinge doors & four of a size for 4-hinge doors. - Specifications: Part Number: 83047, Used on Model

Hitachi UU610 Universal Miter Saw Stand

Hitachi UU610 Universal Miter Saw Stand Review

Hitachi UU610 Universal Miter Saw Stand Feature

• Universal miter saw station; cam lock mount system allows for easy drop on saw installation
• Install nearly any miter saw; 500-pound capacity; fully extends to 20-feet
• Heavy-duty aluminum construction
• Roller fence and cam lock included; optional extension available
• 40-pounds; 2-year warranty

Lightweight and durable, the Hitachi UU610 Universal Work Station is a mobile solution that offers a stable work surface for materials and compatible tools. The aluminum work station is designed to support up to 20 feet of material--It is fully retractable to 4.5 feet and fits sideways into a pickup truck for convenience and portability. The UU610 comes equipped with a wheel kit and is compatible with most miter saws on the market.

This universal work station features extension arms and a cam lock mount to support a full range of tools. View larger.

UU610 Universal Work Station Tool Specifications Construction Aluminum Support Weight 500 lbs. Extension Arms 2 Retracted Length 4.5 ft Supported Length 20 ft Weight 40 lbs. Accessories Included 1 Wheel Kit 1 Universal Tool Mount 1 Adjustable Flip Stop

Universal Tool Mount with Patented Cam Lock
The UU610 Universal Work Station is designed to be used with select tools made by Hitachi, as well as tools made by other manufacturers. In addition to providing a secure place to mount a miter saw, the UU610 offers dual extension arms for accepting router and vise accessories.

Saws can be mounted independently or locked in place using the patented cam lock mount for drop-on saw installation. This versatility enables the Universal Work Station to be used with most miter saws on the market.

What's more, dual adjustable roller fences make it easy to align materials with your saw for more efficient cutting.

Provides Support for Long Workpieces
The UU610 Universal Work Station is able to support workpieces up to 20 feet long. The 12-inch work supports are fully adjustable to handle workpieces of varying sizes.

Compact and Lightweight for Portability
Made from heavy-duty aluminum, the UU610 is both lightweight and durable. It can support up to 500 pounds, yet it only weighs 40 pounds. A wheel kit is included for easy portability.

The unit folds away for easy storage and travel. It retracts down to 4-1/2 feet, so it conveniently fits sideways in a pickup truck.

The Hitachi UU610 Universal Work Station is backed by a limited warranty.

About Hitachi: A Tradition of Innovation
Hitachi Power Tools (Hitachi Koki USA, Ltd.) provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting, and fastening. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

What's in the Box
UU610 Universal Work Station, wheel kit, universal tool mount, and adjustable flip stop.

Factory-Reconditioned Bosch 3912-46 12-Inch Compound Miter saw, with Dust Bag and Work Clamp

Factory-Reconditioned Bosch 3912-46 12-Inch Compound Miter saw, with Dust Bag and Work Clamp Review

Factory-Reconditioned Bosch 3912-46 12-Inch Compound Miter saw, with Dust Bag and Work Clamp Feature

• Reconditioned Bosch Products have a One-year warranty through the Bosch factory or an authorized service center
• Powerful 15 Amp motor, 3.3 max. tool HP
• Crown miting detents - 31.6° Miter and 33.9° Bevel detents for quick, accurate, crown cuts
• Large 25" aluminum base with 3-1/4" sliding extension for 28-1/4" total length - Provides extra support
• Speed-track sliding fence system - base and fence slide independently

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 12" Compound Miter Saw - 3912-46, Quick-Action Clamp - BB1200, Stop Wrench - 2 610 910 828, Fence & Base Wrench - 2 610 355 777, Directional Dust Chute - 2 610 910 845, Dust Bag - BB1205, blade sold sperately

DELTA 35-7666 12-Inch 80 Tooth Non-Ferrous Circular Saw Blade

DELTA 35-7666 12-Inch 80 Tooth Non-Ferrous Circular Saw Blade Review

DELTA 35-7666 12-Inch 80 Tooth Non-Ferrous Circular Saw Blade Feature

• Fine-grain industrial carbide tips for a smooth finish and long life
• Designed to cut natural wood, plywood, particle board, and MDF
• Tips can be re-sharpened up to 15 times
• Impact tested to guarantee tooth set
• Chrome-alloy steel body with heavy, balanced kerf for running accuracy

Designed to cut aluminum, brass, other non-ferrous metal, the DELTA 35-7666 12-inch 80-tooth Non-ferrous Circular Saw Blade features fine-grain industrial carbide tips for a smooth finish and long life. Other features include expansion slots to dissipate heat, reduce noise level, and prevent warping, and this blade's large carbide tips can be re-sharpened up to 15 times. Also included is a chrome-alloy steel body with a heavy, balanced kerf for running accuracy. With a arbor size of one-inch, this blade comes with a -5-degree hook angle and a .120-inch kerf. Fine-grain industrial carbide tips, highly-ground for a smooth finish and long life.

Rockler Table Saw Crosscut Sled

Rockler Table Saw Crosscut Sled Review

Rockler Table Saw Crosscut Sled Feature

• 1/2'' thick 23-3/4'' x 23-3/4'' MDF table with melamine coating.
• Easy-to-read 1/2 graduations and a hair-line indicator ensure error-free setups.
• Extra material allows you to cut the sled down to fit your saw perfectly.
• Right edge of sled functions as a zero-clearance chip breaker.
• Includes four 2'' pieces of 3/4'' wide self-adhesive low-friction tape for smooth sliding of the platform and fence.

No more squinting at those tiny scales! This Crosscut Sled features a large protractor scale way out at the end of the fence, allowing you to precisely tune your angles for air-tight miters and crosscuts. Easy-to-read 1/2 graduations and a hair-line indicator ensure error-free setups. Spacious MDF surface works perfect for crosscutting large panels, while self-adhesive low-friction tape allows easy sliding. Heavy-duty aluminum fence features an adjustable MDF face and a sliding flip-down stop. An aluminum hold-down slides along a separate slot to prevent material from shifting during the cut. Spring-loaded ball bearings in the miter bar are adjustable for a no-slop fit to the track and smooth, accurate cuts.



Aluminum fence measures 3"H x 25"L.
MDF fence face measures 2-7/8"H x 27"L.
MDF Fence face can be removed for replacement.
Spring-loaded ball bearings in the miter bar have adjustable tension to eliminate slop.
Adjustable 90 stop.
Optional Crosscut Sled Drop-Off Platform also available.

Rousseau 2950 Miter Saw Stand

Rousseau 2950 Miter Saw Stand Review

Rousseau 2950 Miter Saw Stand Feature

• Miter saw stand; wheeled and mobile for easy handling
• Heavy-duty construction; fits all miter saws; locking hinge supports
• Solid metal welded frame with powder coated finish
• Includes 1 miter saw stand; saw not included
• 35-1/2-inch work height, 13-inch-wide stock rollers, 12-foot overall extension; limited lifetime warranty

Here Rousseau has engineered a tough, heavy-duty stand for all your mitering needs.

Taller users will appreciate the 35 1/2-inch work height. Even at this height stability is not a problem: extendable legs give you a wide base and low center of gravity that allows you to put a heavy saw on top without the table being wobbly at all. The stand also includes adjustable levelers you can use to compensate for uneven ground.

The table folds up nicely although there doesn't seem to be a place where the feed roller supports can be stored when the stand is folded. This small complaint notwithstanding, the table is amazingly compact and easy to move around when folded (and while completely set up, too).

Some users have complained about the tires: they can come unseated and are difficult to reseat. I didn't have a problem with this. I should also note that, in the past, I have had nothing but positive experiences with Rousseau's service department. A casual survey of a few online reviews confirmed that the small number of users who did have problems with the tires had these resolved quickly and professionally. In other words, don't let this put you off from buying this great stand.--Josh Dettweiler

What's in the Box
13-inch roller stands and bases with 12-feet overall stock support, 10-inch pneumatic tires and adjustable levelers, saw not included

LABEL,SCALE MITER GAGE RYOBI - RIDGID 9182015330302

LABEL,SCALE MITER GAGE RYOBI - RIDGID 9182015330302 Review

LABEL,SCALE MITER GAGE

Rockwell RK7321 BladeRunner with Wall Mount

Rockwell RK7321 BladeRunner with Wall Mount Review

Rockwell RK7321 BladeRunner with Wall Mount Feature

• Includes wall mount, 5 t-shank jigsaw blades, and mitergauge/rip fence
• Durable, low-friction stainless steel table top
• Portable and easy to take anywhere since it weighs only 18 lbs
• Perfect for inside cuts, miter cuts, scroll cuts, metal & tile cuts, circle cuts, and rip cuts
• 5.5 Amp input power

Create a clean cut through wood, metal, plastic, aluminum, or ceramic tile with the Rockwell BladeRunner. Thanks to its quick release wall mount, the BladeRunner is easy to take along on job sites or house projects. The BladeRunner is compatible with any T-shank jigsaw blade--simply change the blade when working with a new material. A low-friction stainless steel tabletop and dust port make both cutting and cleanup easy. Ideal for a multiple variety of cuts, the BladeRunner is truly a versatile cutting machine. Its cutting capacities are: up to 1-1/2 inches (wood), up to 1-1/4 inches (PVC), up to 3/8-inch (aluminum), up to 1/8 inch (steel), and up to 3-8 inch (ceramic tile).

BladeRunner with Wall Mount At a Glance: Variable speed motor control and 5.5-amp input power for cutting versatility Mount on walls or any benchtop surface Durable, low-friction stainless steel tabletop Quick and easy T-Shank blade change Dust port attaches to any shop vacuum

Lightweight, compact design ideal for mounting on walls or benchtop surfaces.

Make precise cuts through wood, metal, plastic, aluminum, and ceramic tile.

Quick-Mounting and Portable Design
With the BladeRunner, there's no need for bulky workbenches or multiple tools. Simply mount the cutter to the wall with the included wall mount, or on any benchtop surface. The 5.5-amp power provides reliable performance without unnecessary bulk. At 13.2 pounds, the BladeRunner is easy to take to and from the job-site.

Stainless steel tabletop.

Versatile Cuts and Instant Blade Changes
This multi-purpose precision cutting machine utilizes any T-shank jigsaw blade, so making a variety of cuts is as simple as a quick blade change. Within moments, you can go from creating scroll cuts in wood to circle cuts in tile. Thanks to its variable speed motor control and a simple blade-changing mechanism, you can quickly switch between different cuts in different materials.With the available accessories, you can make perfect circle cuts (RW9261) or cut picture frames (RW9262) with precision and ease.

Durable Construction with Dust Port for Less Cleanup
Featuring a low-friction, stainless steel tabletop, the BladeRunner's durable design is built to last. For added convenience, its dust port attaches to any shop vacuum to keep your workspace cleaner and improve visibility.

What's in the Box
BladeRunner, 5 T-shank jigsaw blades, miter gauge/rip fence, wall mount, screws, drywall anchors, and user manual.

The BladeRunner is a portable, multi-purpose precision cutter that utilizes any T-Shank jigsaw blades. The variable speed motor control and simple blade changing mechanism allows you to cut wood, metal, plastic, aluminum, and ceramic tile. There really is no limit to the projects that the BladeRunner can tackle. Weighing in at only 18 pounds, this unit can be easily taken anywhere. The unit can be operated on any bench top surface or mounted to the convenient wall mount bracket. The dust port attaches to any shop vacuum for less cleanup and hassle. It includes a wall mount bracket, miter gauge/rip fence, five T-Shank jigsaw blades, and instruction manual.

Aluminum/Plastic Saw Blade 10 Inch TC 68

Aluminum/Plastic Saw Blade 10 Inch TC 68 Review

Aluminum/Plastic Saw Blade 10 Inch TC 68 Feature

• Carbide tipped
• TC Tooth Shape
• 68 Teeth
• For cutting no-Ferrous metals
• Especially good for Aluminum

Carbide-tipped, TC saw blade for Kapex KS 120 sliding compound miter saw is designed for cutting non-ferrous metals, especially aluminum, also for acrylics and hard plastics. Length 260 mm, 2.5mm kerf, 24mm bore, TC Tooth shape and 68 teeth.

12'' X 96T ATB LU85R012

12'' X 96T ATB LU85R012 Review

The ultimate cutoff blades for glass-smooth finishes! Creates the
maximum finish every time.


Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut, extending blade life and giving a crisp, splinter-free flawless finish.


Specifications:
Freud Model: LU85R012
Diameter: 12"
Teeth: 96 ATB
Hook Angle: 10 degrees
Arbor: 1"
Kerf: .116"

Features:
Micrograin carbide tips thick enough for several re-sharpenings.
Perma-SHIELD coating helps reduce friction, heat buildup and
gumming, which adds up to a longer blade life.
Unique Side Grind polishes the material to produce a superior finish.

MITER LOCKING CLAMP RYOBI - RIDGID 181010205

MITER LOCKING CLAMP RYOBI - RIDGID 181010205 Review

MITER LOCKING CLAMP RYOBI - RIDGID 181010205