Hitachi C8FSE 8-1/2-Inch Sliding Compound Miter Saw

Hitachi C8FSE 8-1/2-Inch Sliding Compound Miter Saw Review

Hitachi C8FSE 8-1/2-Inch Sliding Compound Miter Saw Feature

• Lightest in its class at only 31 lbs
• Vertical handle that has a soft, vibration reducing elastomer grip
• Large pivoting fence and table provide better support when cutting crown molding lying flat.
• Externally accessible carbon brush for quick and easy brush changes
• Easy-to-use positive miter stops for quick miter adjustments to 15, 22.5, 31.6, and 45 degrees to the both left and right.

The Hitachi C8FSE 8-1/2-Inch Sliding Compound Miter Saw provides smooth, accurate miters and crosscuts in a variety of workpieces, including trim and crown molding. Its gliding slide system allows for easy handling of large framing pieces, and its compound cutting capability provides versatility on the job. An ideal tool for trim carpenters, framers, and woodworkers who demand precision and reliability, the C8FSE is the lightest and most portable sliding compound miter saw in its class.

C8FSE Compound Miter Saw Tool Specifications Amps 9.2 No-Load Speed 5,500 RPM Blade Diameter 8-1/2" Arbor Size 5/8" Bevel Angle Range Right 0°-5° Left 0°-48° Miter Angle Range Right 0°-57° Left 0°-45° Miter Detent Stops (R & L) 15°, 22.5°, 31.6°, 45° Cross Cut Capacity (90°) 2-9/16" x 12" Tool Dimensions (WxDxH) 21-27/32" x 31-3/32" x 19-3/32" Weight 31 lbs

Linear ball-bearing slide system allows for easy handling of large framing pieces. View larger.

Thumb-actuated miter stops facilitate simple miter adjustments at the most common angles. View larger.

Adjust the bevel up to 48 degrees to the left or 5 degrees to the right for a precision cut. View larger.

Powerful Motor Provides Smooth, Accurate Cuts
The C8FSE Compound Miter Saw features a powerful 9.2-amp motor that generates a no-load speed of up to 5,500 RPM for making crosscuts and miters with ease. The electronic speed control ensures consistent RPM throughout the cut, so you get smooth, precise, controlled cuts each and every time.

Compound Feature for Precise Miters and Bevels
Hitachi designed the C8FSE for versatile, easy use. The thumb-actuated positive miter stops allow for simple miter adjustments at the most common angles: 15.0, 22.5, 31.6, and 45.0 degrees to the right or left. This design allows you to easily change the angle of the cutting blade for creating miters in crown molding and other trim pieces. And with a bevel range of 48 degrees to the left and five degrees to the right, the Hitachi C8FSE provides gorgeous bevels on the first try.

The 8-1/2-inch TCT saw blade (included) makes easy work of delicate trim and other woodwork, and the linear ball-bearing slide system and pivoting fence allow for accurate cutting of large workpieces up to 2-9/16 inches high and 12 inches deep.

Chock-Full of User-Friendly Features
The C8FSE contains plenty of features to help you make the perfect cut the first time. To start, a splinter guard behind the fence reduces tear-out for clean, finished cuts. For further refinement, a comfortable vertical handle with a vibration-reducing elastomer grip keeps you in control at all times, a large table provides a stable guide and sturdy support, and a built-in clamping system holds your workpiece in place.

The C8FSE also includes a dust collector that minimizes accumulation of dust and particles in both your workspace and the saw's interior components, keeping your jobsite clean and prolonging the life of the tool. An added bonus, easily accessible carbon brushes will help your saw perform for the long term.

Weighing just 31 pounds and measuring just 31-3/32 x 21-27/32 x 19-3/32 inches (LxWxH), the C8FSE is the lightest tool in its class, making it the most portable 8-1/2-inch slide miter saw on the market.

Durably built, this tool is backed with an industry-leading five-year warranty. It is compatible with Hitachi's UU610 and UU610CZ Universal Work Stations.

About Hitachi: A Tradition of Innovation
Hitachi Power Tools (Hitachi Koki USA, Ltd.) provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting, and fastening. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry--in fact, the introduction of the C8FSE marks the 20th anniversary of Hitachi's development of the first-ever sliding compound miter saw. In 1988 Hitachi developed the sliding compound miter saw to combine the capacity of a radial arm saw and the convenience of a miter saw. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

What's in the Box
C8FSE Compound Miter Saw, 8-1/2-inch TCT saw blade, dust bag, vice assembly, box wrench, and sub fence.

Weighing a mere 31 pounds, the miter saw is the most portable tool in its class.

Stanley 20-112 Clamping Mitre Box

Stanley 20-112 Clamping Mitre Box Review

Stanley 20-112 Clamping Mitre Box Feature

• An ideal miter box for precise and versatile cuts
• High-impact resistant material
• Molded lip on base edge for easy use without mounting
• Holes in base for fastening to a workbench
• Limited lifetime warranty

The Stanley Clamping Mitre Box features a built-in measuring scale and a honeycomb base with cam pins designed for a secure work piece for accurate cuts. Additionally, the box can cut miters on 45-degree, 90-degree and 22-1/2-degree angles for maximum versatility, features molded storage compartments for cam pins and a pencil, and sports a molded lip on the base edge for easy use without mounting. If you want to mount the box to a workbench, there's pre-drilled holes in the base for easy fastening to a workbench. The saw also comes with a built-in saw stop that prevents cutting into mitre box as well as a manufacturer's limited lifetime warranty. For finish carpentry and light construction projects. Clamping system of honeycomb base with twist-in cam pins to secure a variety of materials, from flat molding to round PVC pipe, for accurate cuts. Cuts miters on 45 and 90 degrees, face angle 45 degrees, and 22-1/2 degree angle for octagonal shapes like casing for bay windows or gazebo molding. Molded storage compartments hold cam pins and pencils. Box constructed of high impact plastic. Molded lip on base edge to reduce twisting during heavy cutting. 2 screw holes in base to anchor box for long cutting projects. Built-in measuring scale. Can be used with traditional rip or crosscut saws, and hacksaws.

Terratek 7-1/4 in. Miter Saw

Terratek 7-1/4 in. Miter Saw Review

Terratek 7-1/4 in. Miter Saw Feature

• 7A Motor Power, 24 teeth TCT saw blade, dust extraction facility, portable.
• Cutting Capacity 0 degree/90 degree (H x W): 1-5/8" x 4"
• 45/90(H x W): 1-5/8" x 2-3/8"
• 0 degree/45 degree (H x W): 3/4" x 4"
• 45 degree /45 degree (H x W): 3/4" x 2-3/8"

Product Overview: Miter Saw. Type: Compound miter. Item Weight: 12.0 lbs. Blade: Diameter: 7-1/4 in. Teeth - Points per Inch: 24 tpi. General Features: Miter: Yes. Saw Type: Miter saw. Cutting Tool: Bevel Index: 45 and 90 deg. Guide: Yes. Motor-Engine: Speed Range RPM: 5000 rpm. Voltage: 120 volts. Controls, Overall: On/Off Type: Trigger Handles: Main Handle Grip: D grip Cord: Cord Option: Corded

Festool Kapex KS 120 Sliding Compound Miter Saw

Festool Kapex KS 120 Sliding Compound Miter Saw Review

Festool Kapex KS 120 Sliding Compound Miter Saw Feature

• Rail forward design increases precision and creates a compact footprint while preventing head play for accurate cuts
• Easily align cuts from the left or right side using the dual laser, lasers clearly define material to be cut
• Micro-adjustable bevel angle with up-front rotary knob, large bevel scale and fine pointers easily set precise angles
• Dust extraction up to 91% with behind-the-cut dust hood and pivoting 36 mm hose
• Includes angle transfer device which automatically bisects transferred angles to the saw and aligns

Compact and incredibly precise, the Festool Kapex KS 120 Sliding Compound Miter Saw delivers professional results in the workshop and on the job site. Advanced electronics, dual laser guides, micro-bevel adjustments, quick-release fences, and easy-to-reference scales all help you maintain control over cuts. And a host of other smart features help keep the saw's footprint small and its body light and portable--all without sacrificing power, accuracy, or dust extraction capability.

Kapex KS 120 Sliding Compound Miter Saw At a Glance: Dual-laser design allows accurate alignment from either side Precise miter and bevel scales and locks ensure accuracy MMC electronics and direct-drive motor for reliability Quick, safe FastFix blade changes Integrated dust extraction for safer, cleaner work sites

Dust Extraction Port sends debris away from your work area.

Stainless steel miter scale features a fine adjustment knob.

Convenient deck height eases work flow.View larger.

MiterFast angle-transfer device gives you quick, accurate results. View larger.

The lightweight magnesium-alloy base makes for easy transport. View larger.

Integrates with MiterFast. View larger.

Dual lasers ensure accuracy.

The Bevel Lock Knob holds your desired angle.

Keyed, non-slip material clamp keeps your material in place.

Dual Laser Design for Accurate Setups
The dual lasers clearly define the material which will be removed during the cut, and their design allows you to align cuts from the left right side of the Kapex KS 120. Three-axis adjustment controls make fine-tuning the lasers easy, and the lasers are electrically powered and require no batteries. Also, a convenient button allows them to be operated without turning on the saw.

Once you've determined your cut line, a center-positioned handle allows you to make cuts with either hand, while a two-stage trigger helps prevent accidental triggering.

Precise Miter Scale, Miter Lock, and Angle Transfer
The Kapex KS 120's etched, stainless-steel miter scale offers large, easy-to-read angles--up to 50-degrees on the left and 60-degrees on the right. Positioned far from the axis of rotation, this scale allows for setups that are accurate within fractions of a degree. And once you've identified the desired setting, the miter lock on the Kapex provides an extremely aggressive hold to prevent inadvertent movement--even when near a positive detent.

Transfer of inside and outside angles from your work piece to the Kapex KS 120 is quick and easy, thanks to the included MiterFast angle-transfer device, which provides a reflective surface for use with the saw's lasers, as well as a sturdy lock that prevents slippage and keeps measurements accurate.

Fine Bevel Adjustment and Secure Bevel Lock
The Kapex KS 120 allows for both left and right bevels, and a fine-adjustment knob controls the bevel of each cut within fractions of a degree. This bevel knob features three settings: positive detents at 0 and -45 degrees, free movement between -45 and +45 degrees, and free movement up to +/-47 degrees.

The knob rotates and engages a rack and pinion to move the head, which is counter spring balanced. This means that once you set a bevel angle there's no need to worry about it shifting before you engage the dependable bevel lock.

For added convenience, there are bevel gauges on both sides of the saw, and the large bevel-adjustment scale is easy to read.

Keyed Clamp and Compact Rail-Forward Design
For added peace of mind, your work piece is held in place by a sturdy, nonslip clamp, which is keyed to make insertion and removal of materials quick and easy. A single, lever-actuated cam-lock secures the clamp in place and a rubber pad protects your work piece, while the clamp's oblong foot provides a flat surface to place against the saw's fence.

Also contributing to the Kapex KS 120's accuracy is its rail-forward design. The saw's robust, 30-millimeter rails are set wide apart to prevent head play and ensure smooth, accurate cuts. This design also allows the saw to be placed against a wall during use, which saves valuable workspace.

Versatile Blade and Unique Cutting Positions
The Kapex KS 120 uses specially designed thin-kerf blades that reduce stress on the saw's motor, reduce noise levels, and dampen vibration for cleaner cuts in a variety of applications.

It offers expanded cutting capacity by offering access to a "special cutting position" that utilizes the back portion of the blade more effectively. This means that by simply flipping a lever to put the saw in this position, you can cut 6-5/8-inch crown molding or cut vertical materials that measure up to 4-3/4-inches by 3/4-inch.

Similarly, simply flipping a knob allows the Kapex KS 120 to cut trenches, so you can create lap joints or pieces that fit around pipes and other obstacles.

Robust Construction Includes MMC Electronics and Direct Drive Motor
Different applications place different demands on your tools, and the Kapex KS 120 offers variable speed control from 1,400 to 3,400 rpm for equally good results when working with a variety of materials. With its constant speed monitoring, the saw is able to maintain consistent blade speeds under heavy loads, which produces clean, consistent results. Soft-start technology prevents jolts at start-up and improves your control over cuts, while overload protection extends the life of the saw.

Also contributing to the Kapex KS 120's performance is a 1,600-watt direct-drive motor, which offers efficient transfer of energy to the blade and features a magnetic brake that reduces the amount of time that the blade takes to spin down.

Quick, Safe FastFix Blade Changes
With Festool's patented FastFix system, blade changes are fast, easy, and intuitive. Turning the FastFix knob locks the arbor and mechanically locks the trigger, so you don't have to worry about accidental start-ups. This allows the blade to be changed with a single hand, while a cupped steel arbor nut prevents accidental over-torquing and damage to the saw and blade.

Compact and Lightweight for Portability
Featuring magnesium-alloy base, the Kapex KS 120 is rigid and durable yet it weighs just 47 pounds--extremely light for a 10-inch miter saw. This makes it easy to move from workshop to job site and back again. Two handle locations allow you to keep the saw's center of gravity near your body while carrying it, reducing the strain on your back. Plus, the Kapex's head locks down for transport, keeping the saw compact and preventing unexpected movement from throwing you off balance.

The saw's travel-friendly design also offers onboard storage for the arbor tool and the power cord.

Integrated Dust Hood and Dust Extraction
This dependable compound miter saw also offers a swiveling dust port that directs dust away from you and your work surface, improving job-site safety and minimizing cleanup time. A pliable, rubber dust hood directs saw dust from the blade into the dust collection port as you work, arresting chips and improving the rate of capture.

This integrated port accepts both 27-millimeter and 36-millimeter hoses, and it can be used with a Festool CT dust extractor to achieve impressive 91-percent sawdust collection.

The Festool Kapex KS 120 Sliding Compound Miter Saw is backed by a three-year limited warranty and a 30-day money-back guarantee

What's in the Box
Festool Kapex KS 120 Sliding Compound Miter Saw, angle transfer device, 60-tooth carbide blade, hold down clamp, and wrench.

The KS 120's "Special Cutting Position" uses more of the blade, so you can tackle more types of jobs.

The Festool Kapex miter saw comes with Festool's high-quality 60-tooth carbide blade for use when cutting woods or soft plastics, an angle transfer device, a hold-down clamp for securing material, and a wrench for unit adjustments. Compact and lightweight at 21.5 kg (47 pounds), you can use the fine adjustment knob to control bevel angles in fractions of a degree. The bevel knob has three settings: positive detents at 0 and -45 degrees, free movement between -45 and +45 degrees, and free movement up to +/- 47 degrees. Bevels can be made to the left or right, and the bevel gauge appears on both sides of the saw. The Kapex blade creates a thin kerf which reduces load on the motor and improves the cut quality. The blades are specially designed to reduce noise levels and dampen vibration. The large 30mm arbor hole reduces blade deflection. A special cutting position allows the Kapex to have a cutting capacity as large as 4-3/4-inches (120mm). The deck height of the Kapex matches the height of our systainer 1 storage containers. On the job site, you can use one or more systainers to support the material being cut. The difference in height between the MFT/3 and MFT/3-Kapex multifunction tables is also equal to the height of the deck providing optimal work flow and support. The Magnesium alloy base of the Kapex was designed to be extremely rigid and durable yet very lightweight. Rubber feet in each corner provide useful traction and fit into the grid hole pattern of any Festool multi-function table. Features Festools patented FastFix blade change system. Turning the FastFix knob locks the arbor, mechanically locks out the trigger, and allows the blade to be changed with a single hand. Dual-line lasers define the entire cut area. Festool products can only be sold in the 50 states.

Makita LS1216LX 12-Inch Dual Slide Compound Miter Saw with Laser and Stand

Makita LS1216LX 12-Inch Dual Slide Compound Miter Saw with Laser and Stand Review

Makita LS1216LX 12-Inch Dual Slide Compound Miter Saw with Laser and Stand Feature

• 4-steel rail sliding system and 6 linear ball bearings deliver adjustment-free dead-on cuts
• Exclusive 5-1/2-inch tall dual sliding fence system features upper and lower fence adjustment
• Independent micro fine laser with on/off switch indicates line of cut left or right of blade
• Includes 5-position jobsite miter stand with 9-foot material extensions for easy jobsite portability
• Cuts 8-inch crown molding (vertically nested), 6-1/2-inch baseboard (vertical), 15-inch crosscuts at 90 degrees

The Makita LS1216LX combines the LS1216L 12" dual slide miter saw and the largest crosscutting and crown cutting capacity in its class with the convenience and mobility of Makita's jobsite miter saw stand. The LS1216L miter saw has a patented 4-Steel Rail Sliding System that further increases rigidity to produce superior cuts, and an exclusive 6 linear ball bearing design for smooth, adjustment-free, "dead-on" accurate cuts. The LS1216LX miter saw and stand is ideal for jobsite use, as well as high-production/manufacturing settings.

View larger

LS1216LX Features CAPACITY - 8" crown molding (vertically nested) and 6-1/2", baseboard (vertical) and 15" crosscut at 90° ACCURATE - Exclusive 6 linear ball bearings and 4-steel rail system deliver maintenance-free "dead-on" accurate cuts VERSATILITY - 5-1/2" tall fence system features upper and lower fence adjustments for more precise cuts DURABILITY - Powerful 15 AMP direct drive motor requires less maintenance than belt-driven saws INCLUDES - Blade, dust bag, vertical clamp, wrench, triangle, and stand

Tool Specifications Blade diameter 12" Arbor 1" Crown molding (nested) 8" Baseboard (vertical) 6-1/2" Max. cutting capacity (90°) 3-5/8" x 15" Max. cutting capacity (45° L/R ) 3-5/8" x 10-1/2" No-load speed 3,200 RPM AMPs 15.0 Dimensions (LxWxH) 31-3/4" x 25-1/4" x 28-3/8" Net weight (saw and stand) 135.4 lbs.

Large Cutting Capacity, Increased Accuracy
The LS1216L will crosscut boards up to 15" wide at 90°, right out of the box with no special setup required. It has an innovative direct drive gearbox and patented retractable guard system engineered for increased vertical cutting capacity and the largest crown molding cutting capacity (8" vertically nested) in its class. The patented retractable rear guard also provides 6-1/2" baseboard cutting capacity (vertical). In addition, the exclusive 6 linear ball bearings deliver smooth, solid and adjustment-free "dead-on" accurate cuts. The saw also has a patented 4-Steel Rail Sliding System that further increases rigidity to produce superior cuts, as the four steel rails provide less deflection. The result is a larger cutting capacity and more accuracy.

Precise Miter and Bevel Cuts
The LS1216L has an exclusive 5-1/2" tall sliding fence system, with four sliding fences featuring upper and lower fence adjustments for more precise miter and bevel cuts to accommodate a variety of cutting applications. The saw miters 0° to 52° left and 0° to 60° right, with positive stops at 0°, 15°, 22.5°, 31.6°, and 45° (left and right). The dual rear-handle bevel lock is easily accessible with adjustments 0° to 45° (left and right), with positive stops at 0°, 22.5°, 33.9°, and 45° (left and right). Precision adjustments are made easier with dual front bevel scales for improved visibility. The easy one-touch (push in and turn) miter lock system is designed for accurate adjustments and increased efficiency. For more precise cuts, a built-in laser indicates the line of cut, whether the blade is turning or not, and also includes an on/off switch and microadjustments for precise "left-of-blade" or "right-of-blade" cutting.

Ease-of-Use Features
In addition to the large cutting capacity, power, and accuracy, the LS1216L offers a range of conveniences and ease-of-use features. The LS1216L has a patented 4-Steel Rail Sliding System that requires less rear space than competitor dual sliding miter saws. The see-through blade guard system provides greater visibility of blade and line of cut, and has a one-step blade change process for increased efficiency. The ergonomic rubberized horizontal D-handle design has a better fit and added comfort, and the large trigger switch is designed for easier operation.

15 AMP Power for Smoother, Higher-Quality Cutting
The LS1216L has a 15 AMP direct gear box motor that never slips, bogs down, or requires maintenance like belt-driven saws. The soft start feature delivers smoother startups, and the Electronic Speed Control maintains constant speed under load for smoother, higher-quality cutting. The LS1216LX includes the Makita Jobsite Miter Saw Stand. The stand adjusts to five positions with a spring-loaded mechanism for quick and easy setups in seconds. It also includes a large platform base and 9' material support extensions with feed roller to support long crown molding. The stand is equipped with a large rubberized handle and solid rubber 12" wheels for easy jobsite portability.

Best in Class for a Range of Applications
The LS1216LX is engineered for precision tasks in woodworking shops, as well as for cutting large materials like 4" x 16" beams and wide boards up to 15". It is ideal for a broad range of tradespeople, including finish carpenters, professional woodworkers, case and base installers, cabinet installers, cabinet manufacturers, closet installers, decking and flooring professionals, siding installers, stair installers, and general contractors seeking a best-in-class 12" dual slide compound miter saw and stand for the jobsite or high-production/manufacturing setting.

About Makita's Miter Saws with DXT
Makita's new miter saws with DXT (Deep and eXact Cutting Technology) are designed with an innovative direct drive gearbox and patented retractable guard system that are engineered for large vertical cutting. In addition, the exclusive 6 linear ball bearings deliver smooth, solid and adjustment-free "dead-on" accurate cuts. The saws also have a patented 4-Steel Rail Sliding System that further increases rigidity to produce superior cuts, as the four steel rails provide less deflection. The four steel rails also enable a more compact rear design than standard two-rail systems. Makita's new miter saws deliver a larger cutting capacity and more accuracy combined with a more compact rear design.

About Makita
Makita is a worldwide manufacturer of industrial-quality power tools, and it offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial-strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800-4-MAKITA (800-462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

What's in the Box
Makita LS1216L 12-inch Dual Slide Compound Miter Saw, 60T TCT Saw Blade, Vertical Vise, Dust Bag, Triangular Rule, Wrench and Stand.
The Makita LS1216LX combines the LS1216L 12-inch dual slide miter saw and the largest crosscutting and crown cutting capacity in its class with the convenience and mobility of Makita's jobsite miter saw stand. The LS1216L miter saw has a patented 4-steel rail sliding system that further increases rigidity to produce superior cuts, and an exclusive 6 linear ball bearing design for smooth, adjustment-free, "dead-on" accurate cuts. The LS1216LX miter saw and stand is ideal for jobsite use, as well as high-production/manufacturing settings.

Skil 5480-01 13 Amp 7-1/4-Inch Circular Saw Kit

Skil 5480-01 13 Amp 7-1/4-Inch Circular Saw Kit Review

Skil 5480-01 13 Amp 7-1/4-Inch Circular Saw Kit Feature

• The durable ball bearing motor construction gives the saw a longer life
• 2-point Line of Sight allows users to make more accurate cuts
• The patented Anti-Snag lower guard provides smooth operation for small cut-off pieces
• The foot is 20-percent larger than the previous generation guaranteeing more stability and control when making cuts
• A rear lever depth-adjustment assures accurate cut depth in material

The 5480-01 7-1/4-Inch SKILSAW is lighter and more compact than previous models, while providing more power to get the job done quickly. User-friendly features, such as the two-point line of sight and a wider, more stable foot, allow users to get the job done right the first time. With over 80 years of engineering experience, the 5480-01 combines lightweight design with the power and durability you have come to expect from a SKILSAW.

2-point line of sight allows users to cut straighter lines with ease.

Rear lever depth adjustment quickly confirms precise cut depth in material. View larger.

Includes an 18-tooth SKILSAW carbide blade.

2-point line of sight increases visibility, allowing users to cut straighter lines with ease Safety Lock/Guarded Trigger minimizes accidental starts Patented Anti Snag lower guard provides smooth operation for small cut-off pieces Rear lever depth adjustment quickly assures accurate cut depth in material Durable ball-bearing motor construction increases the life of the saw Comes with an 18-tooth carbide blade capable of tackling most projects The foot is 20% larger than the previous generation*, guaranteeing more stability and control when making cuts *compared to model 5400-01

Innovative Features and Benefits
The 5480-01 SKILSAW has a 13-amp motor that supplies the necessary strength for ripping through all varieties of wood, while the 7-1/4-inch 18-tooth carbide blade provides the cutting capacity necessary for tackling a variety of projects, including building decks, fences, sheds, or bunk beds. The 5480 is also 1/2 of a pound lighter than its predecessor (5400-01) and boasts a 20% wider foot for greater stability.

The 5480-01 circular saw possesses many user-friendly features, including a patented Anti Snag lower guard, a professional-grade safety feature that reduces hangups in materials when making narrow cutoffs. A rear depth adjustment lever enables the user to easily adjust the depth of cut, while the trigger safety lock prevents accidental starts. The two-point line of sight allows users to cut straight lines with ease, minimizing mistakes. The 5480-01 SKILSAW's powerful 2.3-horsepower motor provides ample power and the ball-bearing motor construction ensures long tool life.

SKIL Heritage
SKIL Power Tools is a leader in portable electric power tools and accessories that serves the consumer do-it-yourself and professional construction markets. Founded in 1924 with the invention of the SKILSAW Worm Drive, SKIL now delivers a complete line of power tools designed and engineered to help do-it-yourselfers achieve home project success, while providing professionals durable, cost-conscience tools for the jobsite.

What's in the Box
5480-01 SKILSAW, 18-tooth SKILSAW Carbide Blade, and wrench.

Product Specifications Amperage:13 Arbor Size: 5/8" round Blade Diameter:7-1/4" Blade Size: 7-1/4" Certification: cULus Cord Length: 6' Depth of Cut at 45°: 1-15/16" max cut Depth of Cut at 90°: 2-7/16" max cut Max. Motor Horsepower: 2.3 No Load RPM: 5,300 Power/Duty: 2.3 HP Rating: 13 amp Voltage: 120V Weight: 11.8 lbs

Ergonomic front and rear handles. Patented safety lock off switch and anti snag lower guard. Rear view depth adjustment. 2 point line of sight for added accuracy. Die cast aluminum blade guards. Comes with combination blade and wrench. Includes a 20 teeth steel blade. Cuts 2 7 16'' at 90, 1 15 16'' at 45. 13A motor. 2.3HP (maximum motor). 4600 RPM, 120V AC. Weighs 9.8 lb.

DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw

DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw Review

DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw Feature

• Integrated XPS cross cut positioning system provides adjustment-free cut line indication
• Powerful 15 amp, 3,800 rpm motor delivers extended power and durability
• Exclusive Back Fence design cuts up to 2 by 16 dimensional lumber at 90-degrees, 2 by 12 at 45 degrees
• Adjustable stainless steel miter detent plate with 10 positive stops improves productivity, ensures accuracy
• Super efficient dust collection system captures over 75-percent of dust generated

The DEWALT DWS780 12-inch double bevel sliding compound miter saw expertly walks the line between the rugged durability and fine precision that professionals need on the job site. From delicate woodworking to heavy-duty framing and deck building, the DWS780 provides the accuracy, capacity, and portability that cabinetmakers, trim carpenters, framers, installers, and contractors need.

DWS780 12-Inch Double Bevel Sliding Compound Miter Saw At A Glance: Advanced dust collection system captures over 75 percent of dust generated—slide or chop Powerful 15-amp motor delivers 3,800 RPM Power cord is routed through the rail in the back, helping to eliminate interference with the slide DWS780’s compact frame weighs just 56 pounds for portability Backed by three-year limited warranty, one-year free service contract, plus 90-day money-back guarantee

The DWS780 12-inch double bevel sliding compound miter saw is not only durable enough to handle rugged materials, it also is equipped with state-of-the-art technology for fine and precision cutting (view larger).

It allows you to bevel from zero to 49 degrees with positive stops at 0 degrees, 22.5 degrees, 33.9 degrees, 45 degrees, and 49 degrees in both right and left directions (view larger).

Precise Cutting Without Recalibration
The DWS780 miter saw features extremely solid construction and the new XPS cross-cut alignment system that features an improved ultra-bright LED light, which casts a laser-like shadow on the work surface and shows the user precisely where the blade will come in contact with the material. This unique alignment system requires no recalibration over time or after changing blades, which makes it more accurate and durable than traditional laser guides.

Ultimate Durability
The DWS780 miter saw’s rugged guards; precision-machined castings, fences, and bevel system; and tough stainless steel miter detent plate are designed to withstand the constant rigors of the job site.

High-Capacity Cutting
The saw features a powerful 15-amp motor that delivers 3,800 RPM. For convenience, the power cord is routed through the rail in the back, eliminating interference with the slide. Additionally, the saw offers an industry-leading combination of cut capacities, which includes 6-3/4-inch vertical capacity, 7-1/2-inch nested crown capacity, 13-7/8-inch horizontal capacity, and exclusive back fence design that cuts up to a 2x16 at a 90-degree angle and 2x12 at a 45-degree angle. To simplify and maximize vertical cutting capacity, the unit includes a rail lock latch for holding the head away from the fence.

Hassle-Free Operation
The dual bevel system is easy to see and use in job site conditions thanks to its high-visibility scale and easy angle adjustment. Bevel from zero to 49 degrees with positive stops at 0 degrees, 22.5 degrees, 33.9 degrees, 45 degrees, and 49 degrees in both right and left directions. The saw also miters 60 degrees to the right and 50 degrees to the left and features an adjustable miter detent plate with 10 positive stops. A cam lock miter button allows the user to lock angles between detents. A miter detent override is also used to allow precise angle adjustment without falling into detents.

What's in the Box
One DEWALT DWS780 12-inch double bevel sliding compound miter saw, one carbide blade, one blade wrench, one dust bag, and one vertical material clamp.

DEWALT's DWS780 can tackle a variety of applications while still be compact and lightweight for easy transport (click each to enlarge).